Home > Configurator Options

Configure System

Enter the values below and then press Display Results to get a recommended system. Click here for help...

Measurement Options

All of our instruments measure differential / gage pressure and flow speed. Select the cases below for extra options.

More details...
More details...
More details...
More details...
More details...

Select Measurement Ranges

Depending on the options above the instrument may have more than one range. More details...

Sensor 1 Range:
Test conditions for sensor 1:
Medium: Air at 20C, 101.325 kPa (absolute)

Probe: Pitot-Static
Test Area: 1m Dia
Sensor 2 Range:
Test conditions for sensor 2:
Medium: Air at 20C, 101.325 kPa (absolute)

Probe: Pitot-Static
Test Area: 1m Dia
Sensor 3 Range:
Test conditions for sensor 3:
Medium: Air at 20C, 101.325 kPa (absolute)

Probe: Pitot-Static
Test Area: 1m Dia

Email:
inform@flowkinetics.com

Tel: (979) 680-0659

Tel: (888) 670-1927

Fax: (979) 680-0659

Mailing Address:
FlowKinetics LLC
4700 Shoal Creek Dr.
College Station, TX 77845
USA

Copyright © 2001-2023 • FlowKinetics™ LLC. • All rights reserved. • Privacy PolicySite Map

Medium:

Temperature: (-200 to 1250 °C)

Pressure: (2 to 30 psi absolute)

Select test configuration and dimensions.

Round Duct:

Diameter (D):

Rectangular Duct:

Width (W):

Height (H):

Open Area:

Max Insertion (H):

Duct or mounting wall thickness (if any):

Select probe that you want to use to measure speed or flow.

Note: Probes are not included with the meters. They are available separately and should be selected according to your requirements. Contact us if you need assistance selecting the right probe for your application.


Pitot-Static Probe

General use for determining point flow speed and flow rates from speed surveys

More details...

Rapid Averaging Probe (RAP)

Designed for quickly measuring average flow speed or flow rates in ducts

More details...

S-Type Probe

Designed for measuring speed in dirty flows such as smoke stacks.

More details...

Kiel Probe

Total pressure probe designed to measure speed where the direction of flow changes considerably during testing

More details...

Select this if you want to use your own probe.

Flow coefficient =

Corrected Speed=flow coefficient × Uncorrected Speed

--------